Example 1
Two PLATES OF 130×8( GRADE 300W) ARE CONNECTED TOGETHER USING M16 BOLTS IN PUNCHED HOLES AND THE EDGES OF THE PLATES ARE GAS-CUT.
( 1 ) check the spacing configuration.
( 2 ) Determine the tensile Resistance.
PITCH IS 60mm
EDGE IS 35mm
END IS 35mm
Steps to follow:
Calculate ;
i). Spacing configuration
ii). Modes of failure in Bolt Connections
iii). Bolt shear
v). Bolt bearing
Notes : fu = 450Mpa for 300W
fu = 480Mpa for 350W
m is Number of shear planes :
1 for single shear plane
2 for double shear plane

​